Import 15-minute sub-hourly meteorological data from any source (such as NSRDB) into PVcase Yield for higher-resolution energy simulations. Upload custom CSV or MET files and map their variables directly to your project scenario.
Before you begin
Create a project in PVcase Yield.
Prepare a 15-minute meteorological data file in CSV or MET format.
A full year of 15-minute data must contain 35,040 rows (365 days) without blank intervals. If your file includes leap-year data (35,136 rows) or covers a partial year, trim or adjust it to 35,040 rows before uploading to avoid import or calculation errors.
Selecting the data source
In your PVcase Yield project, open Project parameters in the left sidebar and click Meteo.
In the Data source section, click Change.
Select CSV and MET files (a banner confirms 15-minute interval support), then click Continue.
Click the upload area and select your CSV or MET file.
Uploading and mapping the file
Check the location coordinates:
If your file contains coordinates, PVcase Yield populates them automatically. (Note: If the file's coordinates differ from your current project location, PVcase Yield updates your project coordinates to match the meteorological file.)
If your file does not include coordinates, enter the Latitude and Longitude manually.
Select the File's time zone from the dropdown (for example, UTC-06:00).
In the Time interval start field, select the start date (year, month, and day) and set the start time to 00:00. PVcase Yield calculates the end interval automatically based on your 35,040 data rows.
Map the data variables. PVcase Yield maps standard column headers automatically—if your file uses custom headers (such as an NSRDB export), assign the parameters manually using the dropdowns:
Global horizontal irradiance, W/m²: Select GHI
Diffuse horizontal irradiance, W/m²: Select DIF
Direct normal irradiance, W/m²: Select DNI
Ambient temperature, °C: Select TEMP
Wind speed, m/s: Select WS
Wind direction (optional): Select WD (leave this unmapped if your file does not include wind direction)
Click Confirm setup to load the data into your scenario.
Reviewing the imported data
Scroll down the Meteo page to verify that the irradiance, temperature, wind, and horizon profile charts display your data properly. Once confirmed, your project is ready for simulation.