Export electrical design data from PVcase Ground Mount directly into PVcase Yield. Using your exact Ground Mount wiring layout lets you calculate DC cabling losses from your physical design rather than relying on generic estimates.
Before you begin
Complete your layout and electrical design in PVcase Ground Mount.
Create a destination project in PVcase Yield.
Exporting the design from Ground Mount
In PVcase Ground Mount, open the top drop-down menu and select Export to Yield (located near Export to PVsyst).
In the dialog box, select your destination project.
Update the layout name, if needed.
Select the PV area in your AutoCAD workspace and press Enter.
In the export confirmation window, click Open Yield Project.
Opening the layout in PVcase Yield
In the export confirmation window, click Open Yield Project.
In the PVcase Yield web interface, refresh the page. Your exported layout—along with its assigned module and inverter—appears on the Layouts & electrical tab.
Configuring layout and electrical settings
Click the newly imported layout to open its settings.
Under Electrical design, select Use from export.
Scroll to Module power classes and define the module quantity for this layout type.
Under General layout information, update the layout name or adjust parameters such as the tracking range (angle) and diffuse optimization, if needed.
Enter the DC cable resistance (typically between 4 and 6 Ω/km, such as 5 Ω/km). Calculate this value independently based on your project's cabling specifications.
Review the Original layout statistics at the bottom to verify the imported Ground Mount parameters.
Click Save layout.
Use from export is currently supported only for Single Axis Trackers (SAT) and Fixed-Tilt (Frames). Terrain-following trackers (TFTs) are not supported.
Running the simulation
Return to the main Layouts & electrical screen.
Click Select and calculate in the top-right corner and choose Single simulation.
Select the Layout, Module, and Inverter for the simulation.
Click Start calculating to run the simulation using your PVcase Ground Mount wiring configuration.